Custom Parts

Ultimate Series | Front and Rear Traction Bar Mounts | 3rd and 4th Gen Dodge | Bolt On | 201044-B

Longhorn Fab Shop Ultimate Series | Front and Rear Traction Bar Mounts | 3rd and 4th Gen Dodge | Bolt On Includes 2 rear brackets, 2 front brackets, mounting hardware, and through bolts. Want to make your own traction bars for your truck? ...

Hypertherm XPR Consumable Rack Files | Caps, Swirl Rings, Tip, Shields, Electrodes | 201096

Hypertherm Consumable Rack Files | Caps, Swirl Rings, Tip, Shields, Electrodes |  201096   Easily store your Hypertherm XPR consumables in a way that allows you to keep an easy and accurate visual inventory.  Makes consumable changes a...

Professional Grade Duramax Traction Bars Weld-It Kit 2001-2010 (200953)

Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pinion yokes, premature u-joint failure and wearing...

Ultimate Series | 3rd and 4th Gen Dodge | Includes 3/4in U-bolts, Nuts and Washers | LFS0098

Longhorn Fab Shop Ultimate Series | 3rd and 4th Gen Dodge | Bolt On | Includes 3/4in U-bolts, Nuts and Washers  This kit replaces factory U-Bolts which are not strong enough to handle the high torque output of modified 3rd and 4th Gen Cummins...

RZR Seat Display | RZR-201061

RZR Seat Display | RZR-201061   Easily display Polaris RZR seats in your show room for customers to easily do side by side comparisons with factory seats, competitive aftermarket seats, and seat bases.  No more swapping seats in and out of...

Heavy Duty RC Wall Hangers (Pair) | 201114

Heavy Duty RC Wall Hangers (Pair) | 201114 RC vehicles can take up tons of space when sitting on tables and shelves.  Use your empty wall space to keep them neatly out of the way and quick to grab while not having to worry about dropping your...

RZR | 900XP | Heavy Duty Rear Plate | RZR-201026

RZR | 900XP | Heavy Duty Rear Plate | 201026   Add strength to the rear frame of your RZR by going from a stamped metal rear plate to this 1/4" thick rear plate with 1/2" thick tow hook and clevis hole built it.  When you're stuck, you always...

Punisher Skull | Raw Steel | 12in Tall x 8-5/8in Wide | 201107

Punisher Skull | Raw Steel | 12in Tall x 8-5/8in Wide | 201107 Punisher skull is cut out of 10 ga steel (0.135" thick") with stars and strips etched into the metal.  These make perfect gifts for the hard to buy for person or perfect to hand up in...

HEXFIRE Fire Rings

Tired of trying to build a fire in ring that looks more like it should have potpourri in it, instead of logs you split by hand the year before? At LONGHORN FAB SHOP we don't build fire rings for decoration, we build them for year-after-year of cool...

Universal Starter Plate | Fit OTC 1750 Revolver and 78160 NORCO 3T | 201123

  Universal Starter Plate | Fit OTC 1750 Revolver and 78160 NORCO 3T | 201123 Great way to get your custom adapter started on your engine stand.  Easily make your own custom engine side flat plate and bolt it to our universal starter...

2011+ Duramax | 2017.5+ Ford | Bolt on Traction Bar Weld It Kit | Standard Grade Rod Ends | 201040

2011+ Duramax | 2017.5 Ford | Bolt on Traction Bar Weld It Kit | Standard Grade Rod Ends | 201040 Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly...

E-Track Backing Plate for Mounting | 4 PACK | Stainless Steel | Fits Vertical and Horizontal | Stainless Hardware Included | 201131

E-Track Backing Plate for Mounting | 4 PACK | Stainless Steel | Fits Vertical and Horizontal | Stainless Hardware Included | 201131 If you're tired of your E-Track pulling up from the floor when you're trying to strap your load down, this is the...

Professional Grade Rod End Rebuild Tool | Made in USA | 201130

Professional Grade Rod End Rebuild Tool | Made in USA | 201130 Rebuild tool for Longhorn Fab Shop Professional Grade Rod Ends.  Required to assemble and disassemble rod ennds. 100% MADE IN USA   CLICK HERE for install tool.

Professional Grade Rod End Rebuild Kit | 0.75in Thru Hole x 1.75" Width | Made in USA | 201129

Professional Grade Rod End Rebuild Kit |  0.75in Thru Hole x 1.75" Width | Made in USA | 201129 Rebuild kit for Longohrn Fab Shop Professional Grade Rod Ends. Longhorn Fab Shop engineered, designed, and manufactured rod end rebuild kit. ...

The Adjustable Rotator | Raises and Lowers | Industrial Rotator | Rotisserie | Ultra Heavy Duty Engine Stand | 3500 ft-lbs of Torque | 201126

3500 FT-LBS of ROTATIONAL TORQUE | RAISES AND LOWERS | ELECTROMAGNETIC BRAKING | VARIABLE SPEED | REVERSING | MOBILE (Caster Wheels) Professionals require nothing less than professional grade equipment.  This industrial rotator stand is designed to...

Batting Cage | Extreme Duty for Professional Sporting Teams, Universities, and Public Parks | 201125

Batting Cage | Extreme Duty for Professional Sporting Teams, Universities, and Public Parks | 201125 NOTES: Developed for professional use 8in x 8in x 1/4in steel posts 2in x 2in x 1/4in steel bracing 3/4in base plates As shown for 70ft net...

Universal Mist Collector Stand for CNC Machines | 201124

Universal Mist Collector Stand  for CNC Machines | 201124 Easily mount your mist collector off the ground where it is easy to clean around or store extra filters underneath.  Allows you to maintain the unit without the need for a ladder,...

Three Pocket Stake Bed Side Panel | 71 inch Width | 24 inch Pocket Spacing | Aluminum |Stainless Hardware | 201122

Three Pocket Stake Bed Side Panels | 71 inch Width | 24 inch Pocket Spacing | Aluminum |Stainless Hardware | 201122 All aluminum stake bed side panel with 304 stainless steel hardware are heavy duty yet light enough to easily lift.  Designed to be...

Longhorn Fab Shop Rotator to OTC 1750 Style Engine Stand Adapter | 201120

Longhorn Fab Shop Rotator to OTC 1750 Revolver Engine Stand Adapter | 201120 Allows your to take your existing mounts that you already have for your OTC 1750 Revolver and use them on the Longhorn Fab Shop Rotator. Features: 5/8" laser cut and bent...

Longhorn Fab Shop | Welding Banner | 201029

Longhorn Fab Shop | Traction Bar Banner | 201029 "Longhorn Fab Shop" welding image.   This high quality banner is perfect for your shop, and let  customers know you carry the best traction bars on the market!  If you are a dealer ask us...